JNTUA College of Engineering (Autonomous) Pulivendula
Muddanur Rd, Pulivendula, Andhra Pradesh 516390
ACCREDITED BY NAAC WITH 'A' GRADE
Muddanur Rd, Pulivendula, Andhra Pradesh 516390
ACCREDITED BY NAAC WITH 'A' GRADE
| S. No. | Name of the Faculty | National | International | ||
|---|---|---|---|---|---|
| Journals | Conferences | Journals | Conferences | ||
| 1. | Dr. V.Venugopal Reddy | 5 | 6 | 41 | 6 |
| 2. | Dr. A. Damodar Reddy | 2 | 2 | 11 | 2 |
| 3. | Dr. Y. Rameswar Reddy | -- | 2 | 7 | 7 |
| 4. | Sri. R. Vishnuvardhan Reddy | 3 | 5 | 4 | 1 |
| 5. | Sri. K. Pavan Kumar Reddy | 2 | 7 | 10 | 1 |
| 6. | Sri. B. Yeswanth Kumar Reddy | 2 | -- | 9 | -- |
| 7. | Sri. S. Prateep Kumar | -- | -- | -- | 1 |
| 8. | Sri. B. Sreenivasa Kumar Reddy | -- | 2 | 4 | 2 |
| 9. | Sri. M. Rajesh | 3 | 4 | 7 | -- |
| 10. | Sri. C. ChandraSekhar Reddy | -- | -- | 4 | -- |
| 11. | Sri. S. Aparna | 1 | 3 | -- | 2 |
| 12. | Sri. V. Madhsudhan Reddy | -- | 3 | 5 | -- |
| S. No. | Name of the Laboratory | Major Equipment available worth above one lakh Rs | Date of procurement | Total cost of the laboratory in lakhs of Rs |
|---|---|---|---|---|
| 1 | Fuels and Lubricants lab | -- | 29.12.2006 | 1.5 |
| 2 | Workshop | -- | 08.07.2007 | 6.5 |
| 3 | Mechanics of solids lab | -- | 08.08.2007 | 8.25 |
| 4 | Fluids Mechanics and Hydraulic Machinery lab | Kaplan turbine, Francis turbine, Pelton wheel turbine | 19.09.2007 | 10.25 |
| 5 | Thermal Engineering lab | VCR Engine | 12.10.2007 | 6.8 |
| 6 | Four Stroke Diesel Engine | |||
| 7 | Two Stroke Petrol Engine | |||
| 8 | Four Stroke Petrol Engine | |||
| 9 | Reciprocating Air Compressor | |||
| 10 | Refrigeration & Air Conditioning Unit | |||
| 11 | Valve and Port Timing Diagram – Cut Section Models | |||
| 12 | Boilers - prototype | |||
| 13 | Heat Pump | |||
| 14 | Metallurgy lab | - | 12.11.2007 | 5 |
| 15 | Production Technology lab | - | - | 8 |
| 16 | Metrology lab | Wear resistance and spark coating device | 09.08.2009 | 7 |
| 17 | Heat Transfer lab | - | 16.08.2009 | 4.7 |
| 18 | CAD/CAM lab | CNC Lathe, CNC Mill, Aristo Six axis Robot, 35 Laptops and 35 Desktops | 16.08.2009 | 30.2 |
