Department of Mechanical Engineering

  • Introduction
  • Vision & Mission
  • PEO'S and PO's
  • Courses Offered
  • Faculty
  • Publications
  • Labs & Special Equipments
  • Events Organized
  • Students Associations
  • Board of Studies
  • Industrial Visits
  • APSSDC Programmes
  • Photo Gallery
Mechanical engineering department started functioning with under graduate program since the inception of the college in the year 2006 with an intake of 60 students and has got a very good reputation. The department has the distinction of organizing the first national level student technical symposium YANTRA'08 in October, 2008 and also starting the first students’ association in the college. The department has well equipped laboratories and highly qualified faculty. The department has established new labs to meet the current curricular requirements and has also modernized the existing labs. The department conducts various student co-circular activities such as student symposiums, workshops, industrial visits, and technical tours. A student chapter of the INSTITUTION OF ENGINEERS (INDIA) [code 516], and Mechanical Engineering Student Association (MESA) are started. The department took academic membership from NAFEMS, an international association for the engineering analysis community. Building area
  • Total area of the Department (in sq. ft./sqm). = 2784 sqm
  • Total Laboratory area of the Department (in sq. ft./ sqm) = 800 sqm
  • Total Area = 3584 sqm.
Departmental Infrastructure
S.NO. ROOM DESCRIPTION USAGE SHARED/ EXCLUSIVE CAPACITY
1 C201 1st year class Room Exclusive 66
2 C202/C203 Tutorial hall and conference hall Exclusive 270
3 C204 M.Tech I Year Class Room Exclusive 66
4 C207 IV Year Class Room Exclusive 66
5 C208 III Year Class Room Exclusive 66
6 C209 II Year Class Room Exclusive 66
7 C210 Drawing Hall Exclusive 66
 
Vision
  • To provide a strong foundation in fundamentals of core subjects so as to understand the basic concepts of Mechanical Engineering and its applications.
  • To provide an awareness on the practical implementation of Engineering Physics in the technological world.
  • To carry out research in Mechanical Engineering field to train Ph.D. students to become good scientists.
Mission
  • To create an academia of high quality through an enquiry based interactive teaching learning model.
  • To develop creative and innovative graduates, technologists of multi faceted personality.
  • To inculcate exemplary professional conduct and ethical values to lead and to use technology for the progress of mankind.
  • To promote innovative and need based research.
PROGRAM EDUCATIONAL OBJECTIVES (PEO)
  • To prepare students to excel in undergraduate programmer/ technical profession.
  • To provide students with a solid foundation in mathematical, scientific and engineering fundamentals required to solve engineering problems and also to pursue higher studies.
  • To train students with good scientific and engineering breadth so as to comprehend, analyze, design, and create novel products and solutions for the real life problems through practical experience in workshop and machines laboratory.
  • To inculcate in student’s professional and ethical attitude, effective communication skills, team work skills, multidisciplinary approach and an ability to relate engineering issues to broader social context.
PROGRAM OUTCOMES (PO)
  • An ability to apply knowledge of mathematics, science, and engineering
  • An ability to design and conduct experiments as well as to analyze and interpret data
  • An ability to design a system, component or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability and sustainability
  • An ability to function on multidisciplinary teams
  • An ability to identify formulates and solves engineering problems
  • An understanding of professional and ethical responsibility
  • An ability to communicate effectively
  • The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental and social context
  • A recognition of the need for and an ability to engage in life-long learning
  • A knowledge of contemporary issues
  • An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice
 
 
Title Field of Specialization Sanctioned Intake Duration (Years) Year of Starting
Under Graduate Program B.Tech Mechanical Engineering 60 4 2006
Post-Graduate Program M.Tech CAD / CAM 25 2 2010
M.Tech. CAD/CAM(Part Time) 25 3 2014
   

Teaching Staff

S.No Name Designation Details
1 Dr.V.Venugopal Reddy Professor and Head View More
Name of the Faculty: Dr.V.Venugopal Reddy Department: Mechanical Engineering Designation: Professor and Head E-mail: vgreddy7@rediffmail.com, vgreddy.mech@jntua.ac.in, hod.me.cep@jntua.ac.in Phone: +91 9441105405 Educational Qualification: Ph.D(NITW), M.E, B.Tech. Work Experience: 30 Years Areas of Specialization: Robotics, Industrial Engineering, CAD/CAM. National Journals: 5 International Journals: 34 National Conferences: 21 International Conferences: 10
  • Conferences At Central Institute of Tool Design Courses attended (CITD), Balanagar, Hyderabad, on CAD/CAM subject for one month in 1991. At M. S. Ramaiah Institute of Technology, Bangalore on CAD/ CAM and Robotics for one week in 1996. At Godavari Fabricators Ltd. Patancheruv, Hyderabad on nondestructive testing (NDT) of welded and foundry parts for one week in 1992. One month training at BHPV Ltd. Vizag in 1986. At I.I.Sc., Bangalore on “ECE Education“ during July 12 and 13th 1996. At Vasavi College of Engg., Hyderabad on “Application of Computer Graphics in Engg.” During 2nd to 14th March’1998. Regularly attending the “Partnership” summits organized by Confederation of Indian Industries (CII), New Delhi. Technical Papers are presented at various national and international conferences including Hong Kong and other parts of China (Dec-2001) and Nepal(Aug-2000). Regularly attending the summits organized by Confederation of Indian Industry, Mumbai from 2002 onwards. Attended a short term program on “Computational fluid Dynamics” at NIT Warangal in January, 2007 for two weeks. Attended a short term program on “Computational fluid Dynamics” JNTU College of engineering, Anantapur in May, 2007 for one week. Attended Engineering congress conducted at NIT Warangal during December 12th to 15th, 2008. Attended a workshop on Opportunities of getting R&D funds for educational institutions” at Anna University, Coimbatore in October, 2009. Attended Indo US Collaboration Center for Engg Education (IUCEE) training program in Teaching Methodology in July, 2009. Attended Engineering congress conducted at NIT Suratkal during December 10th to 13th, 2009. Training of trainers course in RTI act at Dr. MarriChenna Reddy Human Resource. Development Institute of A.P, Hyderabad from 30-4-2012 to 2-5-2012. Academic leadership Programme for Principals by Wipro Technologies Ltd, Hyderabad from 22nd to 25th JANUARY 2012. NBA workshop on accreditation process at JNTU Anantapur from 17th to 19th July, 2013. Attended Management development programme for senior faculty members at INDIAN SCHOOL OF BUSINESS, HYDERABAD, INDIA, from 23rd to 24th December, 2013. Attended Faculty development programe in Portblair, Andaman Nicobar Irland, India organized by National Productivity, New Delhi from 10th to 14th February, 2014.
  • 1. 7th IEEE international Conference on Methods and Models in Automation and Robotics held at Poland during 28-31 August 2001 on “Performance Modeling of Automated Manufacturing systems by Simulation Optimization. 2. International Conference on Logistics and Supply chain Management held at P.S.G. Institute of Technology, Coimbatore, during August 6 – 8th August’2001 on “Simulation Optimization in jobshop scheduling through evolutionary algorithms – a cade study”. 3. 19thAIMTDR Conference held at IIT, Madras in December 200 on “Capacity utilization with cost effectiveness in a grinding wheel industry with emphasis on sequencing scheduling”. 4. International Conference on Intelligent autonomous flexible manufacturing systems, held at Coimbatore Institute of Technology, Coimbatore in December’1999, on “Capacity utilization by identifying the bottleneck area in manufacturing industry – a case study”. 5. International Conference on Forum on Management Challenges, held at Pokhara, Nepal during 20-22 August’2000 on “Assimilation of e-commerce with production planning and control—a perspective”. 6. International Conference on Forum on Management Challenges, held at Pokhara, Nepal during 20-22 August’2000 on “A Simulation of Automated guided vehicle based material handling systems for flexible manufacturing systems”. 7. 17th AIMTDR Conference held at REC, Warangal during January’1997 on “Lagrangian Relaxation approach to scheduling problems –a case study”. 8. SCMIS’2001 International Conference held at Hong Kong during 17th – 19th December’2001 on “Capacity utilization and scheduling using Lagrangian Relaxation Technique –a case study”. 9. 35th CIRP International seminar on manufacturing systems, held at Korea during 13th –16th May’2002 on “Bottleneck analysis of manufacturing systems through analytical and simulation modeling.” 10. International symposium on Hollow structures held at World habitant centre, New Delhi in May 1998, on “Optimization of hollow structures”. 11. International conference on Operations research for Development (ICORD), to be held at Anna University, Chennai, during 27-30, December, 2002 on “Effect of Gamma using Lagrangian relaxation technique for machine scheduling”. 12. International Conference on “e-manufacturing” at R.E.C, Bhopal, during 16-19, November, 2002 on “Lagrangian Relaxation Technique for machine scheduling with earliest penalty- a case study”. 13. International Conference on Asia pacific industrial engineering and management systems at Taipei,Taiwan, during 18-20, December, 2002 on “Scheduling of Multiclass Manufacturing Systems using simulated annealing and Lagrangian Relaxation technique”. 14. 1st Multidisciplinary International Conference on Scheduling: Theory and Applications held in School of Computer Science and Information Technology, University of Nottingham, U.K., during 17-21, August, 2003, on “Performance of Lagrangian relaxation technique for critical analysis of scheduling problems”. 15. National level conference on Manufacturing Modeling analysis at St. Josephs college of Engg, Chennai on 2and 3rd February, 2004 on " IT enabled Supply chain management". 16. International conference on Logistics and Supply chain management ILSCM'04, to conducted at PSG college of Technology, Coimbatore on August 3&4th 2004 on "Revitalization of Supply chain Management" 17. VenugopalreddyV(August, 2007) & CNV Sridhar “Web Oriented Process Capability Evaluation: Integrated With E-Manufacuring - A Case Study” Journal of SCOUR- Institute of Productivity Management., vol 1, No.2 pp 62-67. 18. V.Venugopalreddy, GPP Reddy, (2010) Int Journal 0f six sigma and competitive advantage, “ Process improvement using Six Sigma - a case study in small scale industry”. 19. V.Venugopalreddy, GPP Reddy, (Nov, 2010) Quality world journal, “ Role of experiments in six sigma”. 20. V.Venugopalreddy, GPP Reddy, (March, 2011) Industrial Engineering (IE) Journal, “Process improvement using Six Sigma - a case study in small scale industry”. 21. CNV Sridhar, V.Venugopal Reddy and K.Vijaya Kumar Reddy “Vendor Selection Criteria and approaches: A review” journal of IMS group in JULY 2011. 22. GP Reddy and V.Venugopal Reddy, “Multiple response optimizations using experimental design”. Industrial Engineering Journal, VOL-V & Issue no:5 on May 2012. 23. V.Venugopal Reddy, “Effect Of Gamma And Time Horizon In Lagrangian Relaxation Technique In Scheduling OfMachines”in International conference, “Operations research for data analysis & decision making” from 21st and22nd October 2013 held at University of Kashmir. 24. V.Venugopal Reddy, KL Narsimhulu, “Optimal Allocation in Tandem closed queuing Network with Multi servers using PSO”in 3rd International conference proceedings of Soft Computing, Artificial Intelligence and Applications (SAI-2014) held during 7th and 8th Nov, 2014 at Dubai. 25. V.Venugopal Reddy, KL Narsimhulu,Optimization of Buffer Allocation inManufacturing System using Particle Swarm Optimization.; International Review on Modelling and Simulations (IREMOS). Italy, March 2015. 26. V.Venugopal Reddy, KL Narsimhulu, Optimization of Buffer Allocation in Tandem  Closed Queuing Network using Symbiotic Organisms Search; International Journal of Applied Engineering Research (IJAER), India., May 2015. 27. V.VenugopalreddyDevelopment of Robot simulation [program for polishing shrouded      3D impeller; Indian technology Congress, held at Bangalore during 29-30 July 2015. 28. V.Venugopal Reddy optimization of "Cutting Parameters for Surface Roughness and MRR by using Grey Based Taguchi Method on CNC Turning Machine "Indian technology Congress, held at Bangalore during 29-30 July 2015. 29. Dr. V. Venugopal Reddy, B. Lakshmi Sai"3D Printing For Different Casting Patterns" International Journal of Advance Engineering and Research Development (IJAERD )Volume 4, Issue 8, August-2017, E-Issn:2348-4470, Print-Issn:2348-6406. 30. Dr. V. Venugopal Reddy, S. ChinnaRao"Solar Water Condensation Using Thermoelectric Coolers" International Journal of Advance Engineering and Research Development (IJAERD), Volume 4, Issue 9, September-2017, E-Issn:2348-4470, Print-Issn:2348-6406. 31. Dr. V. Venugopal Reddy, P. Vikramsimha Reddy "Analysis Of Engine Diagnosis Tools For Detecting Trobule Codes In Automobiles" International Journal of Advance Engineering and Research Development (IJAERD )Volume 4, Issue 8, August-2017, E-Issn:2348-4470, Print-Issn:2348-6406. 32. Dr. V. Venugopal Reddy "Engine Diagnosis for Detecting Errors"International Journal of Advance Engineering and Research Development (IJAERD ), Volume 04 Issue 09, September-2017.e- ISSN: 2348 - 4470, p-ISSN: 2348-6406. 33. Dr. V. Venugopal Reddy, N. SreeRinitha "Computer Aided Design ,Analysis And Fabrication Of Patch Panel" International Journal of Advance Engineering and Research Development Volume 4, Issue 8, August-2017, E-Issn:2348-4470, Print-Issn:2348-6406..(IJAERD ) 34. Dr. V. Venugopal Reddy "Design analysis and fabrication of Copper patch panel" International Journal of Advance Engineering and Research Development (IJAERD ), Volume 04 Issue 09, September-2017.e- ISSN: 2348 - 4470, p-ISSN: 2348-6406. 35. Dr. V. Venugopal Reddy, G. Manohar"Study And Effects Of Making Grooves On Piston Head And Performance Test On Single Cylinder CI Engines" International Journal of Advance Engineering and Research Development (IJAERD ),Volume 4, Issue 11, November-2017, E-Issn:2348-4470, Print-Issn:2348-6406.
2 Mr.A.Damodara Reddy Assistant Professor View More
Name of the Faculty: Mr.A.Damodara Reddy Department: Mechanical Engineering Designation: Assistant Professor E-mail: adamodarareddy@gmail.com, damodar.mech@jntua.ac.in Phone: +91 9492036921 Educational Qualification: M.Tech (Ph.D) Work Experience: 12 Years Areas of Specialization: Manufacturing/Composite materials/CAD/CAM National Journals: - International Journals: - National Conferences: - International Conferences: -
3 Mr.Y.RAMESWARA REDDY Assistant Professor View More
Name of the Faculty: Mr.Y.RAMESWARA REDDY Department: Mechanical Engineering Designation: Assistant Professor E-mail: yrameswarareddy.mech@jntuia.ac.in Phone: +91 966090727 Educational Qualification: M.Tech (Ph.D) Work Experience: 9 Years Areas of Specialization: Manufacturing/Production/CAD/CAM National Journals: 1 International Journals: 8 National Conferences: 4 International Conferences: 1
  • Faculty Development Programmes (FDPs) 1. Attended for “Rapid Casting Techniques” organized by GNIT, Hyderabad from 27- 11-2017 to 09-12- 2017. 2. Attended for “Advances In Product Design And Manufacturing” organized by MNIT, Bhopal from 03rd to 08th January- 2017. 3. Attended for “Managemant Developement Program for Improved R&D and III” organized by Administrative Staff College of India , Hyderabad from 19th to 23rd September - 2016. 4. Attended for “Life Long Researchers(LLR)” organized by SVNIT, Surat from 08th to 12th Feb- 2016. 5. Attended for “Entrepreneurship Development” organized Andhra University, Visakhapatnam from 16th to 18th December- 2015. 6. Attended for “Communication And Presentation Skills” organized by IMTR,Goa from 21st to 25th September- 2015. 7. Attended for “Advanced Aerospace Materials Processing,Characterization and Applications Materials and Manufacturing” organized by IIT Roorkee from 01st to 05th June- 2015. 8. Attended for “Continuing Professional Development Programme on Formulation of Research & Development Initiatives for Scientists and Technologists” organized by ESCI, Hyderabad from 16th to 19th September - 2014. 9. Attended for “Essential Techniques for Research problems in Materials and Manufacturing (ETRPMM” organized by Mechanical Engineering Department, Warangal from 14th to 18th April 2014. 10. Attended for “Pedagogy Training” organized by JNTUA College of Engineering, Pulivendula from 01st to 05th March 2014. 11. Attended for “CFD application using Star CCM+” organized by Department of Mechanical Engineering, JNTUA College of Engineering, Pulivendula from 16- 18 Jan- 2014. 12. Attended for “AUTOCAD 2011” organized by Department of Mechanical Engineering, JNTUA College of Engineering, Pulivendula from 22- 25 November- 2011. Conferences 1. K.Chandra Babu, Y.Rameswara Reddy “Optimization of Turning parameters for SS304 Stainless Steel using the Response Surface Method” Presented in NC-eTIME-16 National Conference, Mechanical Engineering Department, JNTUACE, Anantapuramu- 27th August 2016. 2. P.Vinay Kumar Reddy, Y.Rameswara Reddy “Turning parameters Optimization for EN8 Steel using Particle Swarm Optimization” Presented in NC-eTIME-16 National Conference, Mechanical Engineering Department, JNTUACE, Anantapuramu- 27th August 2016 3. Y.Rameswara Reddy, Dr.B.Chandra Mohan Reedy “Optimization of Surface Roughness MRR Turning operation using Extended Taguchi method” Presented in NCETMESD-14 National Conference, RGMCE, Nandyal, 22 March 2014. 4. Y.Rameswara Reddy, Dr.B.Chandra Mohan Reedy “Prediction and Analysis of Surface Roughness of An Aluminium Alloy Materials Using ANN in CNC Turning” Presented in NCIME-13 National Conference, MITS, Madanpalle,21-22 June 2013. International Conferences 1. Y.Rameswara Reddy, Dr.B.Chandra Mohan Reedy “Optimization of WEDM parameters for SUPERNI-718 using Neutrosophic sets and TOPSISMethod” Presented in ICIME-18 1st International Conferenceon Innovations in Mechanical Engineering, Guru Nanak Institute of Technology, Hyderabad ,05th -06th January- 2018.
  • 1. Y.Rameswara Reddy , P.Muni pavan kumar reddy, S. Rajendra Prasad “ Experimental Investigation of Machining Parameter for AJM usining Nimonic alloy75” " Published in IJTIMES, Volume 04- Issue 08, August-2018. e-ISSN : 2455 - 2585 , UGC Approved, Impact Factor: 5.22. 2. Y.Rameswara Reddy , Dr.B.Chandra Mohan Reedy " Optimization of WEDM Parameters for SUPER Ni-718 Using GRA with Neutrosophic Sets " Published in International Journal of Applied Engineering Research , Volume 13 Issue Number(12) June-2018 pp 10924-109430. e-ISSN : 0973 - 4562, , UGC Approved, Impact Factor: 0.14. 3. Y.Rameswara Reddy , Dr.B.Chandra Mohan Reedy " Experimental investigations on MRR, Surface Roughness and Dimensional Deviation of SuperNI-718 alloy steel in Wire-EDM using Taguchi Method " Published in IJREAM , Volume 04- Issue-03 June-2018 pp 354-359. e-ISSN : 1943- 023X, , UGC Approved, Impact Factor: 5.646. 4. Y.Rameswara Reddy , Dr.B.Chandra Mohan Reedy " Experimental investigation and Multiobjective optimization for Wire EDM using TOPSIS and SVNS method" Published in International Journal of Advance Resrach in Dynamical & Control systems , Volume 10-06 Special Issue May-2018 pp 29-38. e-ISSN : 1943- 023X, , UGC Approved, Impact Factor: 0.22. 5. T. Venkata Nagendra kumar, Y. Rameswara reddy “Design of 20-30 MW Radial inflow steam turbine for power generation” Published in IJAERD Volume 04 - Issue 12, Dec-2017. e-ISSN : 2348 - 4470, , UGC Approved, Impact Factor: 4.72. 6. Y.Rameswara Reddy “Optimization of EDM Process Parameters on hard Ti alloys by using Grey Taguchi technique “ published in IJAERD Volume 04- Issue-11 November-2017 pp 2348-6406. e-ISSN : 2348- 4470, UGC Approved, Impact Factor: 4.72. 7. B.Yuvaraju, Y.Rameswara Reddy “ Modeling and Fabrication of movable headlamp system in automobile” Published in IJAERD Volume 04 - Issue 8, Aug-2017. e-ISSN : 2348 - 4470, , UGC Approved, Impact Factor: 4.72. 8. K.Pavan Kumar Reddy, Y.Rameswara Reddy & R.Vishnuvardhan Reddy"Optimization of Surface Roughness and MRR in Turing operation Using Extended Tahuchi Method” Published in IJER, Volume 04 - Issue special, March-2014. e-ISSN : 2319 - 6890, , UGC Approved, Impact Factor: 1.632.
4 R.VISHNU VARDHAN REDDY Assistant Professor (Adhoc) View More
Name of the Faculty: R.VISHNU VARDHAN REDDY Department: Mechanical Engineering Designation: Assistant Professor (Adhoc) E-mail: vishnureddy589@gmail.com, vishnuvardhan.me@jntua.ac.in Phone: +91 8142195730, +91 8187892509 Educational Qualification: M.E Work Experience: 9 Years Areas of Specialization: Production Engineering National Journals: - International Journals: 3 National Conferences: 1 International Conferences: 5
  • Faculty Development Programmes (FDPs) Attended a “FDP on AUTO CADD 2011” at JNTUA College of Engineering Pulivendula from 22nd to 25th November 2011. Attended a five workshop “MISSION 10X” Faculty Empowerment Program conducted by Wipro Technologies at JNTUA College of Engineering Pulivendula from 26/12/2011 to 30/12/2011. Attended A One Week Workshop on “SOLIDWORKS SOFTWARE” at JNTUH College of Engineering Hyderabad from 28th January to 2nd February 2013. Attended a Quality Improvement Program “A Short Term Course on Applications of Lasers in Manufacturing” at Indian Institute of Technology Guwahati from 24th – 28th June 2013. Attended a Short Term Training Course on “Pedagogy Training – Module – I” at NITTTR Chandigarh from 25th – 29th November 2013. Attended a Quality Improvement Program “A Short Term Course on Modeling and Simulation Using Finite Element Methods” at Indian Institute of Technology Roorkee from 7th – 11th January 2014. Attended a Two Day Faculty Development Program on “CFD Applications using Star CCM+”at JNTUACE Pulivendula under TEQIP - II on 16th & 17th January 2014. Attended a Faculty Development Programme on Applications of Finite Element Methods through ANSYS Software: at JNTUACE Pulivendula under TEQIP – II from 20th – 22nd January 2014. Attended a Short Term Course on “MECHATRONICS” at NITTTR Chandigarh from 19th – 23rd January 2015. Attended a Short Term Course on “Product Design and Process Optimization Using Designed Experiment” at Indian Institute of Technology Delhi from 18th – 20th March 2016. Attended a Short Term Course on “Internet of Things (IoT) Advanced Level” at JNTUA College of Engineering Pulivendula Organized by Engineering Staff College of India, Hyderabad from 06th – 10rd March 2017. Conferences International: Presented a paper titled “OPTIMIZATION OF MACHINING PARAMETERS FOR GUN METAL IN END MILLING PROCESS” IN Annual International Conference on Materials Processing and Characterization at Gokaraju Rangaraju Institute of Engineering and Technology from 8th to 10th March 2012. National: Presented a paper titled “PREDICTION OF SURFACE ROUGHNESS USING MATHEMATICAL AND ANN MODELS IN END-MILLING OPERATION” in 4th National Conference on AIMS-2010 held at Kumaraguru College of Technology, Coimbatore. Presented a paper titled “Optimization of Surface Roughness & MRR in Turning Operation using Extended Taguchi Method” in AICTE Sponsored National Conference on Emerging Trends in Mechanical Engineering for Sustainable Development – 2014, held at RGMCET Nandyal on 22nd March 2014. Presented a paper titled “Optimization of Turning Parameters & Cutting Tool wear on AISI 1040 using Utility Theory & Taguchi Method” in 2nd National Conference on Innovations in Mechanical Engineering, held at MITS Madanapalli on 18th & 19th December 2014. Presented a paper titled “Modeling and Analysis Functionally Graded Material for Disc Plate under Mechanical Loads”, at Indian Technology Congress 2015, held at NIMHANS Convention Centre, Bengaluru on 29th & 30th July 2015. Presented a paper titled “Experimental Investigation on Machining Characteristics in EDM”, in National Conference on Trends in Mechanical Engineering, held at JNTUACE Ananthapur, on 23rd September 2015.
  • K.Pavan Kumar Reddy, Y.Rameswara Reddy, R.VishnuVardhan Reddy, “Optimization of Surface Roughness and MRR in Turning Operation Using Extended Taguchi Method”, International Journal of Engineering Research, Vol. 3, Issue: Special 1, pp. 92 – 96, 2014, ISSN: 2319 – 6890 (Online), 2347 – 5013 (Print). D.Rajabhushan, R.Vishnu Vardhan Reddy, “Human Knee Joint MRI Digital Fabrication of 3D Printed Scaffolds”, International Journal of Advance Engineering and Research Development, Vol. 4, Issue: 8, pp. 467 – 472, 2017, ISSN: 2348 – 4470 (online), 2348 – 6406 (Print). S.Rafiuddin, R.Vishnu Vardhan Reddy, “Optimal Design and Analysis of Wind Turbine Blade and Hub Coupled System”, International Journal of Advance Engineering and Research Development, Vol. 4, Issue: 9, pp. 638 – 646, 2017, ISSN: 2348 – 4470 (online), 2348 – 6406 (Print).
5 K.PAVAN KUMAR REDDY Assistant Professor (Adhoc) View More
Name of the Faculty: K.PAVAN KUMAR REDDY Department: Mechanical Engineering Designation: Assistant Professor (Adhoc) E-mail: pavanmech42@gmail.com, pavankumar.me@jntua.ac.in Phone: +91 9491419908 Educational Qualification: M.Tech, (Ph.D) Work Experience: 7 Years Areas of Specialization: Powder Metallurgy, Optimization, CAD/CAM National Journals: 2 International Journals: 4 National Conferences: 6 International Conferences: -
  • Faculty Development Programmes (FDPs) Attended for “A One Week Short term course on Solid Works Software” jointly organized by Department of Mechanical Engineering, JNTUH College of Engineering, Hyderabad and Logical solutions Limited from 28th January to 2nd February 2013. Attended a AICTE sponsored short term course on “Applications of LASERS in Manufacturing” held at IIT Guwahati, organized by the Department of Mechanical Engineering During 24th to 28th June- 2013. Attended for A five day short term course on “Essential Techniques for research problems in materials and manufacturing (ETRPMM)” held at NIT Warangal organized by the material science department during 14th – 18th April-2014. Attended a QIP short term course on “Advanced Aerospace Materials: Processing Characterization And Application” from 1st – 5th June 2015 organized by the material & metrology and polymer science departments, Indian Institute of Technology Roorkee, Roorkee. Attended a TEQIP-II Sponsored Short Term Course on “Product And Process Optimization Using Designed Experiments” from March 18-20, 2016 organized by Department of Textile Technology, Indian Institute of Technology Delhi, New Delhi. Attended a Self Financed Short Term Course on "Numerical optimization Techniques (NOT-2016)" from September 8th to 12th 2016 organized by Department of CIVIL Engineering, MNNIT, Allahabad. Attended a GIAN course on "Micro and Nano Manufacturing Processes" from 5th-10th December 2016 jointly organized by MHRD Govt of India and IIT, Madras. Attended a TEQIP-II sponsored short term course on "Paper and Article Writing with LATEX" during 17th to 19th, March 2017 Organized by Department of Electrical and Electronics Engineering, JNTUA College of Engineering, Pulivendula. Conferences Presented a paper in National Level Conference on Advances in Mechanical Engineering title on “Multi-Objective Optimization of the Surface Roughness and MRR in Turning Operations Using Gray-based Taguchi Method” at School of mechanical Engineering, Vignan University. On 5th and 6th of April-2013. Presented a paper in National Level Conference on Emerging Trends in Mechanical Engineering for Sustainable Development-2014 title on “Optimization Of Surface Roughness & MRR In Turning Operation Using Extended Taguchi Method” at Department of Mechanical Engineering, RGM CET, Nandyala. On 22nd March 2014. Presented a paper on title “Optimization Of Turning Parameters & Cutting Tool Wear On AISI 1040 Using Utility Theory And Taguchi Method” in the second national conference on Innovations in Mechanical Engineering during 18th & 19th December 2014. Presented a paper in national conference on trends in mechanical engineering title “Design and analysis of three wheeler automobile helical gear” at JNUTA College of Engineering Anantapur during 23rd -24th September 2015. Presented a paper in national conference on trends in mechanical engineering title "Design and fabrication of Multi-Functional Elevator" at JNUTA College of Engineering Anantapur during 27th August 2016. Participated in "National Symposium of Mechanical Engineering Research Scholars (NSMERS 2016)" held on 7th october, 2016 at NIT Warangal, Telangana state, India.
  • National Mr.K.Pavan Kumar Reddy , Dr.K.Srinivas, “Multi-Objective Optimization of the Surface Roughness and MRR in Turning Operations Using Gray-based Taguchi Method” National Level conference Proceedings, at School of mechanical Engineering, Vignan University. On 5th and 6th of April-2013, PP-107. K.Praneeth Kumar, K.Pavan Kumar Reddy, “Design and analysis of three wheeler automobile helical gear” National Level Conference Proceedings, at JNTUA college of Engineering, Anantapur PP-79. International K.Pavan Kumar Reddy, Y.Rameshwara Reddy, “Optimization Of Surface Roughness & MRR In Turning Operation Using Extended Taguchi Method” in International Journal for Engineering Research Volume No.4, Issue No. Special Issue, PP : 93-97 ISSN – 2319-6890 Y.Pratap Kumar, K.Pavan Kumar Reddy, “Design and Analysis of Aircraft Wheel hub” in International Association of Engineering & Technology for Skill Development ISBN:978-15148872-194. K.Pavan Kumar Reddy, G.Janardhan Reddy, "Development of Single Point Incremental Forming Process on CNC Milling Machine Using 3D Printed Fixture Arrangement" Published in IJAERD, Volume 04 Issue 09, September-2017. e-ISSN : 2348 - 4470, p-ISSN : 2348-6406, UGC Approved. Impact factor - 4.72 (SJIF 2017). K.Pavan Kumar Reddy, C.Raghavendra, "Optimization Of Various Machining Parameters Of Edm By Using Genetic Algorithm" Published in IJAERD Volume 04 Issue 09, September-2017. e-ISSN : 2348 - 4470, p-ISSN : 2348-6406, UGC Approved. Impact factor - 4.72 (SJIF 2017).
6 B YESWANTHKUMAR REDDY Assistant Professor (Adhoc) View More
Name of the Faculty: B YESWANTHKUMAR REDDY Department: Mechanical Engineering Designation: Assistant Professor (Adhoc) E-mail: yeswanth.basireddy@gmail.com Phone: +91 9440500736 Educational Qualification: M.Tech Work Experience: 7 Years Areas of Specialization: Design, Manufacturing, Mechatronics National Journals: - International Journals: 5 National Conferences: - International Conferences: -
  • 1. Attended a National Seminar on Advances in Nuclear Power Generation at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad held on 23rd and 24th December 2009. 2. Attended a Faculty Development Program on AUTOCAD 2011at JNTUA College of Engineering Pulivendula from 22nd to 25th November 2011. 3. Attended MISSION 10X workshop conducted at JNTUA College of Engineering Pulivendula from 26th to 30th December 2011. 4. Attended a Faculty Development Program on Advanced Machining Techniques at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad from 16th to 18th January 2013. 5. Attended a Faculty Development Program on Modeling and Simulations using Finite Element Methods at Indian Institute of Technology, Roorkee from 7th to 11th January 2014. 6. Attended a Faculty Development Program on CFD Applications Using STAR CCM+ at JNTUA COLLEGE of Engineering Pulivendula from 16th to 18th January 2014. 7. Attended a Faculty Development Program on Applications of Finite Element Method Through ANSYS Software at JNTUA COLLEGE of Engineering Pulivendula from 20th to 21th January 2014. 8. Attended a Short Term Course on MECHATRONICS at National Institute of Technical Teachers Training and Research, Chandigarh from 19th to 23rd January 2015. 9. Attended Continuing Professional Development Programme on Internet of Things(IoT) Advanced Level organized by Engineering Staff College of India at JNTUA College of Engineering Pulivendula from 6th to 10th March 2017. 10. Attended a Faculty Development Programme on Rapid Casting Techniques at Gurunanak Institute of Technology, Hyderabad from 27th November to 09th December 2017.
  • International Md.Irfan, S.Irfan Sadaq, B.Yeswanth Kumar Reddy, S.Shahar Banu, published a paper on “Themo structural Analysis of Nitinol Tube”, Scholars Journal of Engineering and Technology, PP 890-894, ISSN 2321-435X (online), ISSN 2347-9523 (print) Md.Irfan, B.Yeswanth Kumar Reddy, S.Irfan Sadaq, S.Shahar Banu, published a paper on “Evolution of Small Scale Solar Pump Using Shape Memory Alloy”, in International Journal of Emerging Trends in Engineering Research (IJETER) Volume 2, No.11, pp47-51, ISSN 2347-3983 B.Yeswanth Kumar Reddy, G.Venkata Subbaiah, S.Pavan Kumar, M.Ashok Kumar, Published a paper on “EXERGY ANALYSIS OF THERMAL POWER PLANT(RTPP)” in International Journal of Research in Engineering and Technology, Volume 4, pp:73-77, eISSN:2319-1163 K.Venkata Narayana Raju, B.Yeswanth Kumar Reddy, “Design and Simulation of Die Casting Mould using Robot Paths”, International Journal of Innovative Research and Development, Volume 4, Issue 8, July 2015. K.Govardhan Reddy, B.Yeswanth Kumar Reddy, P.M.Naresh Kumar Yadav & Dr.S.Sreenatha Reddy, “Experimental Fabrication of Economical Segway”, International Journal of Advanced Trends in Engineering and Technology, January Special Issue 2018, Page number 48-54
7 S PRATEEP KUMAR Assistant Professor (Adhoc) View More
Name of the Faculty: S PRATEEP KUMAR Department: Mechanical Engineering Designation: Assistant Professor (Adhoc) E-mail: prateepkumar.s@gmail.com Phone: +91 9885100387 Educational Qualification: M.Tech Work Experience: 7 Years Areas of Specialization: REFRIGERATION AND AIR CONDITIONING National Journals: - International Journals: - National Conferences: - International Conferences: -
  • SHORT TERM COURSES: AICTE Sponsored FDP Two Weeks Short term course on “Computational Methods for flow and heat transfer analysis-Application of CFD Tools”. Participated in the 3 day TEQIP short course on “Engineering Noise Control” held at IIT Hyderabad during December 22-24, 2014. WORKSHOPS & FACULTY DEVELOPMENT PROGRAMMES: Participated in TEQIP sponsored two day National level Faculty development program on “ENTREPRENEURSHIP DEVELOPMENT INITIATIVE IN INDIA in collaboration with IEEE Hyderabad section” organized by the department of Computer Science Engineering, JNTUA College of Engineering, Pulivendula during 16th -17th , March 2016. Participated in the Six days TEQIP workshop on “Thermal Analysis of Materials Using DSC, DTA, TG & Dilatometer (TAM-III)” organized at IIT Hyderabad, during December 14-19,2015 Participated in two day FDP at USHA International Ltd, Hyderabad. under CII-TEQIP project organized on 8-9th January 2015. Participated in 5 days “Pedagogy” Program Conducted at JNTUACE Pulivendula. Attended for 2 days FDP on “Auto CAD 2011” Conducted at JNTUACE Pulivendula. Participated in 5 days a Mission 10X workshop on “FMP” Conducted at JNTUACE Pulivendula. Participated in two day FDP on “CFD Applications using star CCM+” held at JNTUACE Pulivendula on 16-18th January 2014. Participated in two day FDP on “Applications of Finite Element method through ANSYS Software” held at JNTUACE Pulivendula on 20th -21st January 2014.
8 B.Sreenivasa Kumar Reddy Asst.Professor (Adhoc) View More
Name of the Faculty: B.Sreenivasa Kumar Reddy Department: Mechanical Engineering Designation: Asst.Professor (Adhoc) E-mail: sreenivasreddy8@gmail.com Phone: +91 9490445669 Educational Qualification: D.M.E,B.Tech,M.Tech,(Ph.D) Work Experience: 11 Years Areas of Specialization: Thermal Engineering National Journals: - International Journals: 3 National Conferences: 1 International Conferences: 3
  • Faculty Development Programmes (FDPs) 1. Attended for “A One Week Short term course on “Refrigeration and Automobile Air conditioning” organized by Department of Automobile Engineering, MVSR College of Engineering, 23rd July to 28th July 2018. Conferences Attended one day National level conference on Trends in Mechanical Engineering (TIME’2015) at J.N.T.U.A Ananthapuramu on 23rd September 2015. Title: Air Cooling in Automobiles by using Vortex Tube Refrigeration System Participated & presented a paper in International Conference held at NIT Trichy, Tamil Nadu June 13th to 15th 2014. Participated& presented a paper in International Conference held at Royal Institute of Technology Hyderabad, Andhra Pradesh - February 2013. Participated & presented a paper in National Conference held at Andhra University Visakhapatnam, Andhra Pradesh - April 2013.
  • International Eco-Friendly Refrigerants as Alternatives for Refrigerant R134a - a Review - IJSER IISN: 4523-1287-5486 Vol. 8 pp122-132, May 2016. Published International Journal (Applied Mechanics and Materials), title “Air Cooling in Automobiles by using Vortex Tube Refrigeration System.” IISN: 1662-7482 Vol.s 592-594 pp 1408-1412, May 2014. Published International Journal (IJEST), title “Air Cooling in Automobiles by using Vortex Tube Refrigeration System.” ISSN: 0975-5462 Vol. 5 No.02 pp 341-348, February 2013.
9 B.Vamsidhar Reddy Assistant Professor (Adhoc) View More
Name of the Faculty: B.Vamsidhar Reddy Department: Mechanical Engineering Designation: Assistant Professor (Adhoc) E-mail: bhoomireddy351.mech@gmail.com Phone: +91 9959254435 Educational Qualification: M. Tech Work Experience: 05 Years Areas of Specialization: CAD/CAM National Journals: - International Journals: 3 National Conferences: 3 International Conferences: -
  • 1. B.Vamsidhar Reddy " Static Structural Analysis of Multiplate Clutch With Different Friction" Indian technology Congress, held at Bangalore, 29-30 July2015.
  • 1. Mr. B. Vamsidhar Reddy, C. Chandra Teja " Processing And Characterization Of Coconut Coir-Human Hair Reinforced Epoxy Based Composites" International Journal of Advance Engineering and Research Development (IJAERD ), Volume 4, Issue 8, August-2017, E-Issn:2348-4470, Print-Issn:2348-6406. 2. Mr. B. Vamsidhar Reddy " Processing and Characterization of Coconut Coir- human hair reinforced Epoxy based Composites" International Journal of Advance Engineering and Research Development (IJAERD ), Volume 04 Issue 09, September-2017. e- ISSN: 2348 - 4470, p-ISSN: 2348-6406. 3. B.Vamsidhar Reddy " Static Structural Analysis of Multiplate Clutch With Different Friction" Indian technology Congress, held at Bangalore, 29-30 July2015.
10 M RAJESH Assistant Professor (Adhoc) View More
Name of the Faculty: M RAJESH Department: Mechanical Engineering Designation: Assistant Professor (Adhoc) E-mail: rajeshmurkur9@gmail.com Phone: +91 8500427851 Educational Qualification: M. Tech Work Experience: 5 Years Areas of Specialization: CAD/CAM National Journals: - International Journals: 3 National Conferences: 4 International Conferences: -
  • Faculty Development Programmes (FDPs) 1. Attended a National Level “Faculty Development Program on Auto CADD 2011” Organized by Department of Mechanical Engineering at JNTUA College of Engineering Pulivendula from 22nd to 25th November 2011. 2. Attended a National Level Three day Faculty Development Programme on “ CFD APPLICATIONS USING STAR CCM+” Organized by Department of Mechanical Engineering at JNTUA College of Engineering Pulivendula from 16th to 18th January 2014 3. Attended a Faculty Development Programme on “APPLICATIONS OF FINITE ELEMENT METHODS THROUGH ANSYS SOFTWARE” at JNTUA College of Engineering Pulivendula under TEQIP – II from 20th – 22nd January 2014. 4. Participated in 5 days Faculty Development Programme on “Pedagogical Training Programme” Program Conducted at JNTUACE Pulivendula from 1st to 5th March 2014 under TEQIP – II 5. A Two day National Level Workshop on “ADVANCED MANUFACTURING SYSTEMS SIMULATION-HANDS ON TRAINING THROUGH FLEX SIM SOFTWARE” from 8th to 9th September 2014 in Sri Vidhya Nikethan College of Engineering at Tirupathi 6. A National Level Workshop on “HUMAN VALUES AND PROFESSIONAL ETHICS” at JNTUACE Pulivendula under TEQIP – II from 7th to 8th November 2014 7. Attended a Five Day Short Term Course on “SOLID AND SURFACE CAD MODELLING WITH CAM APPLICATIONS IN CNC MACHINING” from 19th to 23rd January 2015 at IIT Kharagpur. 8. Attended a Three Day Training program on “ ENTREPRENEURSHIP DEVELOPMENT” conducted at AU College of Engineering( Autonomous), Andhra University, Vishakhapatnam from 16th to 18th December 2015 organised by ESCI 9. Attended a Two Day National Level Faculty Development Program on “ENTREPRENEURSHIP DEVELOPMENT INITIATIVE IN INDIA (EDII-16)”, in collaborated with IEEE Hyderabad, from 16th to 17th March 2016 at JNTUACE Pulivendula 10. Attended a Two Day National Level workshop on “TEACHING DYNAMICS FOR ENGINEERING FACULTY” Organized by Department of Humanities and Social Sciences at JNTUA College of Engineering (Autonomous) Pulivendula under TEQIP – II from 14th – 15th March 2017. 11. Attended a Three Day Sponsored Short Term Training Program On “ PAPER AND ARTICLE WRITING WITH LATEX” Organized by Department OF Electrical l& Electronics Engineering JNTUA College of Engineering (Autonomous) Pulivendula under TEQIP-II from 17th – 19th March 2017. 12. Participated in A Short term Training program on “Paper and Article Writing with LATEX” organized by the Department of Electrical and Electronics Engineering, JNTUA College of Engineering (Autonomous) Pulivendula during 17th March 2017 to 19th March 2017 13. Participated a six days a Faculty Improvement Program (FIP) on “CATIA V5 R20” Organized by Engineering (APSSDC) Department of Skill Development, Entrepreneurship & Innovation, Government of Andhra Pradesh from 10 April 2017 to 15 April 2017 at N.B.K.R. Institute of Science & Technology, Nellore. Conferences 1. Presented a paper with titled as “Design and Structural and Thermal Analysis on Rail Wheel And Axle” in National Level Conference on Trends in Mechanical Engineering (TIME’15) Organised by JNTUACE Anantapuramu. 2. Presented a paper with titled as “Design, Modeling and Analysis of Two Bottom Reversible Plough” in National Conference on Emerging Trends in Mechanical Engineering (NC e-TIME’16) 14th July 2016 Organised by JNTUACE Anantapuramu. 3. Presented a paper with titled as “Design, Design and Fabrication of Solar Tricycle for Handicapped Person” in National Conference on Emerging Trends in Mechanical Engineering (NC e-TIME’16) 14th July 2016 Organised by JNTUACE Anantapuramu. 4. Presented a paper with titled as “Design and Fabrication of Solar Tricycle for Handicapped Person” in “NSMERS” National Symposium of Mechanical Engineering Research Scholars on 7th October 2016 Organised by the Department of Mechanical Engineering, NIT Warangal.
  • 1. Published a paper with titled as “Design, Analysis and Fabrication of Vertical Axis Wind Mill” in “IJMETMR” International Journal & Magazine of Engineering, Technology, Management and Research, ISSN No: 2320-3708 (Print), ISSN No: 2348-4845 (Online), Vol: 02, July 2015, page number: 292-295. 2. Published a paper with titled as “Experimental Study And Simulation Analysis on in “AIREAS” Anveshana’s International Journal of Research in Engineering and Applied Sciences”, (ISSN -2455-6300), Volume 2, Issue 5 (2017, May), page number: 32-38 3. Published a paper with titled as “ Development of Vertical Axis Wind Turbine With Multi Directional Nozzle” in “IJAERD” International Journal of Advance Engineering and Research Development”, Volume 4, Issue 12, December-2017, e-ISSN(Online): 2348-4470, p- ISSN (Print): 2348-6406, Page number: 27 - 33
11 SANGATI APARNA REDDY Assistant Professor (Adhoc) View More
Name of the Faculty: SANGATI APARNA REDDY Department: Mechanical Engineering Designation: Assistant Professor (Adhoc) E-mail: sangatiaparna402@gmail.com Phone: +91 9494715366 Educational Qualification: M. Tech Work Experience: 4 Years Areas of Specialization: CAD/CAM National Journals: - International Journals: - National Conferences: - International Conferences: -
  • 1. Actively participated in “Essentials for NX Designers” conducted at JNTUA College of Engineering Anantapur, Organized by SIEMENS Center of Excellence from 18 Dec 2017 to 23 Dec 2017 at Ananthapuramu. 2. Participated at National Level Workshop on Teaching Dynamics for Engineering Faculty 3. Participated at Internet of Things Advanced Level
12 C.CHANDRASEKHAR REDDY ASSISTANT PROFESSOR (ADHOC) View More
Name of the Faculty: C.CHANDRASEKHAR REDDY Department: Mechanical Engineering Designation: ASSISTANT PROFESSOR (ADHOC) E-mail: chandra.chagam@gmail.com Phone: +91 9492761728 Educational Qualification: M.Tech Work Experience: 5 years Areas of Specialization: Refrigeration & Air conditioning National Journals: - International Journals: 2 National Conferences: 1 International Conferences: -
  • Faculty Development Programmes (FDPs) 1. Attended for “A One day workshop on Human values and professional ethics” organized by JNTUA College of Engineering, Anantapur on 04th July, 2014. 2. Attended for “A Two day workshop on Entrepreneurship Development program” organized by AU College of Engineering (Autonomous), Vishakhapatnam on 16-18 December 2015. 3. Attended for “two day national workshop on Composite materials: characterization and its applications” organized by JNTUA college of engineering (Autonomous), Pulivendula on 19-20 October 2016. 4. Attended for “Six day Faculty development program on Essentials for NX Designers” Conducted by JNTUA College of Engineering, Anantapur on 18 – 23 December 2017. 5. Attended for “Two weeks Faculty development program on Industrial Robotics” Conducted by JNTUA College of Engineering, Anantapur on 09 – 21 JULY 2018. Conferences: 1. Presented a paper in National Level Conference on Emerging trends in Mechanical Engineering “Design and fabrication of Banana fibre Extraction machine” at department of mechanical Engineering, JNTUA College of Engineering, Anantapur. On 27th August 2016.
  • 1. C.Chandrasekhar Reddy, M.Sampath Kumar, "Development the prototype of Merry Go round pump" Published in IJRS, Volume 04, Issue 04, April 2015. e-ISSN: 2319-7064, UGC Approved. Impact factor - 4.438, Index Copernicus value (2013): 6.14 2. M.Mahesh Reddy, C.Chandrasekhar Reddy, “Optimal Design & analysis of compression helical spring for enhancement of life.” Published in IJAERD, Volume 04, ISSUE 11, NOVEMBER 2017. e-ISSN (o): 2348-4470, p-ISSN (P): 2348-6406, UGC Approved. Impact factor (SJIF): 4.72.
13 V. Madhu sudhan Reddy Assistant Professor (Adhoc) View More
Name of the Faculty: V. Madhu sudhan Reddy Department: Mechanical Engineering Designation: Assistant Professor (Adhoc) E-mail: madhu.aits@gmail.com Phone: +91 9441636500 Educational Qualification: M. Tech (Advanced Manufacturing Systems) Work Experience: 3 Years Areas of Specialization: Manufacturing Systems National Journals: - International Journals: 2 National Conferences: - International Conferences: -
  • 1. Attended a Two day national workshop on“Composite materials: Characterization and its applications” organized by Department of Mechanical Engineering, JNTUA College of Engineering, Pulivendula during 19th and 20th October 2016. 2. Attended a Two day national workshop on “Teaching dynamics for engineering faculty” organized by Department of Humanities and social sciences, JNTUA College of Engineering, Pulivendula during 14th and 15th March 2017.
  • 1. V.Madhu sudhan reddy, A.G venkatesh, “ Experimental analysis of a welding component made with copper alloy electrode cap tip in resistance spot welding” Published in IJAERD, Volume 04 Issue 08, August-2017. e-ISSN : 2348 - 4470, p-ISSN : 2348-6406, UGC Approved. Impact factor - 4.72 (SJIF 2017). 2. V.Madhu sudhan Reddy, K.M.Abraham, “ Influence of cutting fluids on the carbide tool life in milling operation” published in IJMEAATR, ISSN 2348-2370, volume no.3, issue no.2, November 2014.
14 PURUSHOTHAM NAIK B Assistant Professor ( Adhoc) View More
Name of the Faculty: PURUSHOTHAM NAIK B Department: Mechanical Engineering Designation: Assistant Professor ( Adhoc) E-mail: purush357@gmail.com Phone: +91 9502837882 Educational Qualification: M.Tech Work Experience: 4 Years Areas of Specialization: CAD/CAM National Journals: - International Journals: 1 National Conferences: 4 International Conferences: -
  • 1. Attended for “A One Week Short term course Numerical and Optimization Techniques (NOT-2016)” organized by Department of Civil Engineering, Motilal Nehru National Institute of Technology Allahabad8thSeptember to 12thSeptember 2016. 2. Attended for “Two Day National Level Workshop on Research Methodology in Science and Technology” organised by TEQIP-II, JNTUA college of engineering, pulivendula during 17th and 18th October 2016. 3. Attended for “Two Day National Level Workshop on Research Trends in Fluid Dynamics and Numerical Techniques”organised by the Department of Mathamatics, JNTUA college of engineering, pulivendula during 21stand 22ndOctober 2016. 4. Attended for “Two Day National Level Workshop on Teaching Dynamics for Engineering Faculty” organised by the Department of Humanities and Social Sciences, JNTUA college of engineering, pulivendula during 14th and 15th march 2017.
  • 1.B.Purushotham Naik ,G.Janardhan Reddy, "Development of Single Point Incremental Forming Process on CNC Milling Machine Using 3D Printed Fixture Arrangement" Published in IJAERD, Volume 04 Issue 09, September-2017.e-ISSN : 2348 - 4470, p-ISSN : 2348-6406, UGC Approved. Impact factor - 4.72 (SJIF 2017).
15 MASTAN.V ADHOC LECTURER View More
Name of the Faculty: MASTAN.V Department: Mechanical Engineering Designation: ADHOC LECTURER E-mail: mastn.mech@gmail.com Phone: +91 7893122906 Educational Qualification: M.TECH.(Ph.D) Work Experience: 6 Years Areas of Specialization: DESIGN National Journals: 2 International Journals: - National Conferences: - International Conferences: -
  • Participated in Faculty Development Program on AutoCAD 2011 at JNTUA College of Engineering, Pulivendula in November 2011. Participated in Faculty Development Program on Advanced Machining Process at GRIET in January 2013. Participated in one Day faculty development program on A practical approach on computational fluid dynamics held on 07-12-2013 At CMR Engineering College Hyderabad Participated in two day workshop on Designing Solar PV Systems at CMR Engineering College, Hyderabad in August 2014. Participated in Faculty Development Program on Finite Element Analysis-Structural Applications Using ANSYS at CMR Technical Campus in December 2014. Participated in one day workshop on Zooming concepts in Research Methodology at CMR Engineering College, Hyderabad in February 2015. Participated A National level hands on workshop on Accreditation Quality Enhancement through Outcome Based Engineering Education at Guru Nanak Institutions, Hyderabad in November 2015. Participated in Faculty Development Program on Human Values & Professional Ethics at CMR Engineering College, Hyderabad in December 2015. Participated in one day workshop on Nanoelectronics & its applications at CMR Engineering College, Hyderabad in January 2016. Participated in Three Day Faculty Development Program on Research Trends & Issues in Mechanical Engineering at Malla Reddy Engineering College, Hyderabad in February 2016. Participated in A One Week Faculty Development Program on Applications Of CFD In Thermal-Fluids Engineering at CMR Engineering College, Hyderabad in March 2016.
  • Published a Paper Entitled Design and Parametric study of two wheeler piston by aluminum alloy (7475-T761), In organizing committee of the IJSETR, at Hyderabad in March 2016.(Volume No.05, Issue No.7 IJSETRVO5ISO7P9012). Published a Paper Entitled Optimization of the surface roughness parameters and MRR in turning operation using Taguchi Method of Aluminum HE30, In organizing committee of the Seminar Groups, at Hyderabad in March 2016. (IJATIRVO8ISO3P9013).
16 POSA LAKSHMI PRASANNA ASSISTANT PROFESSOR(ADHOC) View More
Name of the Faculty: POSA LAKSHMI PRASANNA Department: Mechanical Engineering Designation: ASSISTANT PROFESSOR(ADHOC) E-mail: lakshmiprasannaposa@gmail.com Phone: +91 9160894032 Educational Qualification: M.Tech Work Experience: 1 Year Areas of Specialization: ADVANCED I.C ENGINES National Journals: - International Journals: - National Conferences: 1 International Conferences: -
  • Faculty Development Programmes (FDPs) 1.Participated in 10 days program of “BRITISH COUNCIL “ which is conducted through Andhra Pradesh Higher Education English Communication Skills Project(APSCHE) to improve the employment skills , at JNTUACEP pulivendula 2017. Conferences: 1. Presented a paper in National Level Conference on “EMERGING TRENDS IN MECHANICAL ENGINEERING (NC e-TIME’16) Organized by Department Of Mechanical Engineering, at JNTUA college of engineering ananthapuramu, On 27thAugust,2016. WORKSHOPS: 1. Participated in “Automobile Anatomy 100% Hands-On Workshop” Organized by the mechanical department of AP IIIT,RK Valley affiliated to RGUKT ,during 20th to 25th December 2012. 2. Actively participated in “Essentials for NX Designers” conducted at JNTUA College of Engineering Anantapur, Organized by SIEMENS Center of Excellence from 26Feb 2018 to 03 Mar 2018 at Ananthapuramu. 3. Participated in a National Level Students Technical Symposium as a session chair in YANTRA 2K17 held during 8th and 9th September 2017. Internship: 1. Attended for the summer Internship project on “ Performance Of The Power Plant And Focused On The Boiler” in RTPP, Andhra Pradesh Power Generation Corporation Limited(APGENCO) at V.V Reddy Nagar, Kadapa District during 24.04.2013 to 24.06.2013.
17 VENKATA RAMANA MADURU ASSISTANT PROFESSOR(ADHOC) View More
Name of the Faculty: VENKATA RAMANA MADURU Department: Mechanical Engineering Designation: ASSISTANT PROFESSOR(ADHOC) E-mail: mvr.mec@gmail.com Phone: +91 9492468284 Educational Qualification: M.Tech Work Experience: 3 Years Areas of Specialization: ADVANCED I.C ENGINES National Journals: - International Journals: - National Conferences: - International Conferences: -
Paper Publications of Teaching Faculty
S. No. Name of the Faculty Papers published in reputed journals Total
National International
1. Dr.V.Venugopal Reddy 05 34 39
2. Mr.A.Damodhara Reddy -- -- --
3. Mr.Y.Rameshwara Reddy 1 8 09
4. Mr.R.Vishnu Vardhan Reddy 1 3 04
5. Mr.K.Pavan Kumar Reddy 02 04 06
6. Mr.B.Yeswanth Kumar Reddy 05 05
7. Mr.S.Prateep Kumar 00 00 00
8. Mr.B.Sreenivasa Kumar Reddy 00 03 03
9. Mr.B.Vamsidhar Reddy 00 03 03
10. Mr.M.Rajesh 00 03 03
11. Smt.S.Aparna 00 00 00
12. Mr.C.Chandrasekhar Reddy 00 02 02
13. Mr.V.Madhusudhan Reddy 00 02 02
14. Mr.B.Purusotham Naik 00 01 01
15. Mr.V.Mastan 02 00 02
16. Mis.P.Lakhsmi prasanna 00 00 00
17. Mr.M.Venkata Ramana 00 00 00
   
Laboratories in the Department with Equipments
S. NO NAME OF LABORATORY & EQUIPMENTS
1. CAD LAB
  • CATIA V5 R19,  IRON CAD, ANSYS 14.0, AUTODESK Educational Solution Set
2. AUTOMATION Lab
  • AUTOMATION STUDIO, WORKSPACE, ARISTO ROBOT
3. CAM LAB
  • CNC MILL, CNC TURN, CNC DRILL
4. FLUID MACHINERY  AND HYDRAULIC MACHINERYLAB
  • Impact Of Jets On Vanes, Pelton Wheel, Francis Turbine, Kaplan Turbine, Single Stage Centrifugal Pump, Multi Stage Centrifugal Pump, Reciprocating Pump, Venturimeter, Orifice Meter, Turbine Flow Meter, Determination Of Friction Factor For A Given Pipe Line, Determination Of Loss Of Head Due To Sudden Contraction In A Pipe Line
5. HEAT TRANSFER LAB
  • Thermal Conductivity Of Metal Bar, Composite Wall Apparatus, Thermal Conductivity Of Insulating Powder, Thermal Conductivity Of Asbestos Powder Using Guarded Hot Plate Method, Heat Transfer Through Lagged Pipe, Measurement Of Emissivity, Stefen Boltzmann Apparatus, Heat Transfer In Natural Convection, Forced Convection, Heat Pipe Demonstrator, Pin Fin Apparatus, Parallel Flow / Counter Flow Heat Exchanger, Critical Heat Flux Apparatus, Boiling Heat Transfer Apparatus, Drop And Film Wise Condensation Apparatus, Unsteady State Heat Transfer Apparatus
6. MANUFACTURING TECHNOLOGY LAB
  • Arc Welding, Tig Welding, Mig Welding, Oxy Acetylene Gas Welding, Resistance Spot Welding, Air Plasma Cutting, Hydraulic Press, Blanking Operation, Piercing Operation, Injection Moulding, Blow Moulding, Permeability Test On Moulding Sand
7. THERMAL LAB
  • Refrigeration Test Rig And Air Conditioning Test Rig, Valve Timing Diagram Of 4 Stroke Diesel Engine, Port Timing Diagram Of Single Cylinder Two Stroke Petrol Engine, Study Of Boilers, Assembly And Disassembly Of Four Stroke Diesel Engine, Two Stage Reciprocating Air Compressor, Two Stroke Single Cylinder Petrol Engine Coupled To D.C Generator Loaded Resistance Rheostat With Motoring Test Rig, Four Stroke Four Cylinder Engine Coupled To D.C Generator Loaded Resistance Rheostat With Motoring Test Rig
8. MACHINE TOOL LAB
  • Lathe Machines, Shaper Machine, Drilling Machine, Milling Machine and Electro Discharge Machine.
9. MECHANICS OF SOLIDS LAB
  • Izod Test, Charpy Test, Rockwell Hardness Test, Brinell Hardness Test, Spring Test, Universal Testing Machine, Torsion Test
10. INSTRUMENTATION AND CONTROL SYSTEMS LAB
  • Mcleod Guage Transducer For Vacume Pressure Measurement, Piezo Resistive Transducer For Pressure Measurement, Resistance Temperature Detector Transducer, Measurement Of Flow Using Rotameter, Measurement Of Strain Using Strain Guage, Capacitive Transducer For Angular Displacement, Thermocouple For Temperature Measurement, Temperature Sensor Panel,  Magnetic Pickup For Speed Measurement, L.V.D.T For Displacement Measurement, Vibration Transducer
11. METALLURGY AND MATERIAL SCIENCE LAB
  • Preparation And Study Of Micro Structure Of Iron, Copper, Aluminium, Brass, Cast Iron, Mild Steel, Heat Treated Steels,
  • Hardenability Of Steels By Jominy End Quench Test
12. Metrology lab
  • Calibration Of Measuring Instruments, Sine Bar And Bevel Protractor, Surface Plate Using Spirit Level, Flatness Of Optical Flats By Using Monochromatic Light Source, Measurement Of Gear Tooth Thickness, Cylinder Bore Guage To Measure Bore Diameter, Measurement Of Straightness And Flatness Of Surface By Using Autocollimeter, Surface Wear Reisistance Testing Using Electro Spark Coating Unit
13 Mechanical Workshop
  • FITTING SHOP, CARPENTRY SHOP, HOUSE WIRING SHOP, SHEETMETAL SHOP, WELDING SHOP, FOUNDRY SHOP
  Special Equipment / Facilities
  • TIG Welding
  • Plasma cutting Machine
  • MIG Welding
  • Inverted micro scope
  • Electro spark coating device
  • Image analysis software
  • Injection and Blow moulding machine
  • Hydraulic press for making washers and coils
  • Simulation software packages
  • Universal Testing Machine
  • ARISTO 6 Axis Robot
  • Universal Milling Machine
  • Electro Discharge Machine
  • 3D Printting Machine
  • Tool Maker’s Microscope
  • CNC Slant bed Lathe machine with all attachment
  • CNC Milling machine with ATC and with all attachments
Faculty development programs / Workshops  organized by the Department
  • National Level Seminar on “CFD and Dynamics of Robotics” in October 2010.
  • Faculty Development Programme on "AUTOCAD" in November 2011.
  • Faculty Empowerment Programme "Mission 10X(Phase-I)" in December 2011, associated with Wipro Technologies Hyderabad.
  • Faculty Empowerment Programme "Advanced Mission 10X" in February 2012, associated with Wipro Technologies Hyderabad.
  • Faculty Empowerment programme "Mission 10X(Phase II)" in April 2012, associated with Wipro Technologies Hyderabad.
  • Faculty Development programme on "Computational fluid dynamics through STAR CCM+ " in January 2014.
  • National Level workshop on "Finite Element Methods Through ANSYS software" in January 2014.
  • A National workshop on "composite material characterization and its applications" in October 2016.
  Symposiums and Workshops organized by the Department for Students
  • YANTRA’08, A National Level Students Technical Symposium in October, 2008.
  • YANTRA’09, A National Level Students Technical Symposium in September, 2009.
  • ROBOGYAN2K10, A National Level Robotics Workshop in April, 2010.
  • ROBOGYAN 2K11, A National Level Robotics Workshop in March, 2011.
  • YANTRA’11, A National Level Students Technical Symposium in September 2011.
  • ROBOGYAN’12, A National Level Workshop on Robotics in September 2012.
  • YANTRA’12, A National Level Students Technical Symposium in December, 2012.
  • YANTRA’14, A National Level Students Technical Symposium in October, 2014.
  • ROBOGYAN’14, A National Level Workshop on Robotics on 28th Feb & 1st March, 2014.
  • YANTRA’15, A National Level Students Technical Symposium in October, 2015.
  • ROBOGYAN’15, A National Level Workshop on Robotics in October 2015.
  • ROBOGYAN’16, A National Level Workshop on Robotics in September 2016.
  • YANTRA’16, A National Level Students Technical Symposium in September, 2016.
  • ROBOGYAN’17, A National Level Workshop on Robotics in Feb 2017.
  • National Workshop on “Dot Code Workshop” on 22nd & 23rd July 2017.
  • YANTRA’17, A National Level Students Technical Symposium in September, 2017.
  • ROBO-ZEST’17, A National Level Workshop on “Home automation & Greenhouse Assistance” on 09th & 10th September’17.
  • National Workshop on “3D Printing and Vehicle Diagnosis” on 09th & 10th September’17.
  • National Workshop on “Workspace and Automation studio” on 09th & 10th September’17.
  • YANTRA’18, A National Level Students Technical Symposium on 26th and 27th September, 2018.
  • ROBOGYAN'18, A National Level Workshop on “Home automation & Greenhouse Assistance” on 29th & 30th September’18.
  • National Workshop on “Vehicle Diagnosis and 3D Printing” on 27th & 28th September’18.
  • National Workshop on “Vehicle Disassembly Assembly and 3D Printing” on 27th & 28th September’18.
 
  • Student Associations
  1. Mechanical Engineering Student Association (MESA).
  2. The Institute of Engineers (India) (IEI) - Code:516.
  3.  Robo club ( Brand image of ROBOGYAN).
  4. Took academic membership from NAFEMS (International Association for the Engineering Analysis Community), United Kingdom.
  5. Innovative club to introduce innovative ideas
  • Memberships in corporative institutions
    • ISTE, New Delhi
    • IE (I), Kolkata
    • SAME (Society of American Military Engineers)
    • IAENG  (International Association of Engineers)
Industrial visits by the students and faculty
  • APSRTC regional workshop, Kadapa – II year Ist sem Mechanical (2006 batch)- October 2007.
  • NELCAST Limited, Gudur, Nellore(dt) – IInd year II sem Mechanical ( 2006 batch) and Ist year Mechanical (2007 batch) – January 2008.
  • Rayalaseema Thermal power plant, Muddanur- III year I st sem Mechanical (2006 batch) and IInd Year Ist sem (2007 batch) September 2008.
  • APSRTC regional workshop, Kadapa – II year IInd sem Mechanical (2007 batch) and Ist year Mechanical (2008 batch)- February 2009.
  • Industrial Exhibition, Bangalore – IIIrd IIsem Mechanical (2006 batch) February 2009.
  • Mangala Industries” (Amaraja Bateries) at Puthalapattu, chittoor district, III Year I Sem Mechanical (2011 batch) December 2013.
  • Shiridi Sai Electrical Pvt Ltd, Kadapa, III Year II Sem Mechanical (2011 batch) on November 2014
  • Aplicum Pvt Ltd. Refrigerators manufacturing company, Bangalore, III Year I Sem Mechanical (2013 batch) August 2016.
  • Bharat Earth Movers Limited (BEML), Bangalore, III Year I sem Mechanical (2013 batch) August 2016.
  • Govindaraja Textiles limited, Pulivendula and Pulivedula polymers Pvt Ltd, Pulivendula– Final year Ist sem Mechanical (2006 batch), IIIrd year Ist sem Mechanical (2007 batch), IInd year Ist sem Mechanical (2008 batch) and Ist year Mechanical ( 2009 batch) – October 2009.
LIST OF AP SKILL DEVELOPMENT PROGRAMS ATTENDED BY THE STUDENTS AT SEIMENS CENTRE OF EXCELLENCE ,JNTUA CE, ANANTAPUR.
S.No Programme Name YEAR / SEM No of students attended Date & Venue
1 Basics of PLC M.Tech I YEAR & II YEAR Students 30 members 13th to 18th  November 2017 & Department of Mechanical Engineering, JNTUA CEA.
2 Basics of Mechatronics M.Tech I YEAR & II YEAR Students 30 members 11th to 18 December 2017 & Department of Mechanical Engineering, JNTUA CEA.
3 Basics of NX CAD B.Tech III YEAR II SEMESTER students 30 members 18th to 23rd  December 2017 & Department of Mechanical Engineering, JNTUA CEA.
4 Basics of Rob CAD B.Tech III YEAR II SEMESTER students 30 members 18th to 22nd  December 2017 & Department of Mechanical Engineering, JNTUA CEA.
5 Programming of  robotics B.Tech III YEAR II SEMESTER students 30 members 23rd  to 29th December 2017 & Department of Mechanical Engineering, JNTUA CEA.
6 CNC Programming B.Tech III YEAR II SEMESTER students 30 members 05th to 10th  February 2018 & Department of Mechanical Engineering, JNTUA CEA.
7 FEM Through NX CAD B.Tech III YEAR II SEMESTER students 30 members 05th to 10th  February 2018 & Department of Mechanical Engineering, JNTUA CEA.
8 Basics of PLC B.Tech II YEAR II SEMESTER students 30 members 26th February to 3rd   March 2018 & Department of Mechanical Engineering, JNTUA CEA.
9 Basics of Rob CAD B.Tech II YEAR II SEMESTER students 30 members 26th February to 3rd   March 2018 & Department of Mechanical Engineering, JNTUA CEA.
10 Basics of NX CAD B.Tech I YEAR II SEMESTER students 51 members 26th February to 3rd   March 2018 & Department of Mechanical Engineering, JNTUA CEA.
11 CNC Programming B.Tech II Year I Semester Students 62 members 30th July to 11th August 2018 & Department of Mechanical Engineering, JNTUA CEA.
12 Basics of NX CAD B.Tech III Year I Semester Students 36 Members 30th July to 11th August 2018 & Department of Mechanical Engineering, JNTUA CEA.
13 Basics of PLC B.Tech IV Year I Semester Students 36 Members 30th July to 11th August 2018 & Department of Mechanical Engineering, JNTUA CEA.
 
[gallery link="file" columns="4" size="medium" ids="1281,1280,1279,1278,1277,1272,1271,1270,1269,1268,1267,1266,1265,1264,1263,1262,1273,1274,1275,1276"]